Alloy Research Topics with MX-Lab
Various research topics are being explored using MX-Lab.
Below are examples of papers published on each topic.
- HEA8
- Tailoring microstructure with spatial heterogeneity in CoCrFeMnNi high-entropy alloy via laser surface relaxation
- Multi-layered heterostructured CoCrFeMnNi high-entropy alloy processed using direct energy deposition and ultrasonic nanocrystalline surface modification
- Extraordinary combination of strength and ductility in an additively manufactured Fe-based medium entropy alloy through in situ formed η-nanoprecipitate and heterogeneous microstructure
- Cryogenic tensile behavior of laser additive manufactured CoCrFeMnNi high entropy alloys
- Study of microstructure and properties of in-situ alloyed AlCoCrFeNi (Y) high-entropy alloy by laser directed energy deposition method
- Fabrication of structural and compositional heterostructured CoCrNi–CoCrFeMnNi multi-material using direct energy deposition additive manufacturing
- Dynamic compression behavior of CoCrFeMnNi high-entropy alloy fabricated by direct energy deposition additive manufacturing
- Novel Ni–Co-based superalloys with high thermal stability and specific yield stress discovered by directed energy deposition
- Machine Learning3
- Explainable machine learning for understanding and predicting geometry and defect types in Fe-Ni alloys fabricated by laser metal deposition additive manufacturing
- Virtual surface morphology generation of Ti-6Al-4V directed energy deposition via conditional generative adversarial network
- A machine learning approach for predicting evaporation-induced composition variability in directed energy deposition in-situ alloying
- Al Alloy5
- Microstructure and mechanical properties of laser DED produced crack-free Al 7075 alloy: Effect of process parameters and heat treatment
- Microstructure and property enhancement of 7075 aluminium alloy via laser metal deposition augmented by in-situ ultrasonic vibration
- Deposition of iron aluminide through laser direct energy deposition of Aluminum on steel substrate
- Exploring the erosion resistance of Al6061 metal matrix composite fabricated via additive manufacturing for future lunar exploration
- Investigating the Influence of AlSi10 Alloy Powder Characteristics on the Directed Energy Deposition Process
- Additional Process4
- Cracking suppression in additive manufacturing of hard-to-weld nickel-based superalloy through layer-wise ultrasonic impact peening
- Assessment of High-Performance Steels Through Additive Manufacturing and Ultrasonic Impact Peening
- Laser Rescanning for Enhancing Mechanical Properties of Laser-Directed Energy-Deposited High-Manganese Steels
- Surface finish enhancement of additively manufactured austenitic steel via novel sustainable electro mechano-chemical polishing
- In-Situ Alloying6
- Evaluation of in-situ alloyed Inconel 625 from elemental powders by laser directed energy deposition
- Crystallographic-orientation-dependent magnetic properties of Fe–Ni permalloy in-situ alloyed using additive manufacturing
- Transformation-induced plasticity in the heterogeneous microstructured Ti-Zr-Nb-Sn alloy via in-situ alloying with directed energy deposition
- Study of microstructure and properties of in-situ alloyed AlCoCrFeNi (Y) high-entropy alloy by laser directed energy deposition method
- Evaluation of microstructure, mechanical properties, and corrosion resistance for Ti-doped inconel 625 alloy produced by laser directed energy deposition
- High Temperature Fracture Behavior of Directed Energy Deposited Crnbtizr Refractory Complex Concentrated Alloy Using Elemental Powders
- FGM3
- Microstructure and Mechanical Properties of P21-STS316L Functionally Graded Material Manufactured by Direct Energy Deposition 3D Print
- Local composition detouring for defect-free compositionally graded materials in additive manufacturing
- Crack Mitigation at Interface Between Inconel 718 and Stainless Steel 316L during Directed Energy Deposition under N2 Atmosphere
- Multi Material4
- Fabrication of structural and compositional heterostructured CoCrNi–CoCrFeMnNi multi-material using direct energy deposition additive manufacturing
- Interface characteristics and mechanical behavior of additively manufactured multi-material of stainless steel and Inconel
- Design of dissimilar material joint for defect-free multi-material additive manufacturing via laser-directed energy deposition
- Research and Application Progress in Laser Additive Manufacturing of Heterogeneous Metals
- Cladding/Repair5
- Heterostructured alloys with enhanced strength-ductility synergy through laser-cladding
- Surface heterostructuring of laser-clad 316L stainless steel through texture-driven deformation twinning
- Enhanced strength-ductility synergy in stainless steel 316L through hierarchically tailored microstructure via laser-based repair deposition
- Enhancement of mechanical and tribological performance of Ti–6Al–4V alloy by laser surface alloying with Inconel 625 and SiC precursor materials
- Repairability and effectiveness in direct energy deposition of 316L stainless steel grooves: A comparative study on varying laser strategy
- Mechanial Properties9
- Effects of Laser Power on the Microstructure Evolution and Mechanical Properties of Ti–6Al–4V Alloy Manufactured by Direct Energy Deposition
- Characterization and Mechanical Properties of Stainless Steel 316L Fabricated Using Additive Manufacturing Processes
- Delayed deformation-induced martensite transformation and enhanced cryogenic tensile properties in laser additive manufactured 316L austenitic stainless steel
- Mechanical and magnetic properties of soft magnetic Fe–Ni permalloy produced by directed energy deposition processes
- Focusing High-Resolution Three-Axis Neutron Diffractometer for Investigations of Special Tasks of Powder Diffractometry
- Microstructure, Recovery Stress and Mechanical Property of Direct Energy Deposition Welded Fe-Mn-Si Based Shape Memory Alloy
- Nitrogen alloyed austenitic Ni-free stainless steel for additive manufacturing
- Strukturní analýza slitiny TiNbCr vhodné pro skladování vodíku v pevné fázi
- Characterization on the Hydrogen Embrittlement in Inconel 625 Fabricated Via Laser Directed Energy Deposition
- Process Parameter9
- Additive Manufacturing Optimization of Directed Energy Deposition-Processed Ti-6Al-4V Alloy using Energy Density and Powder Deposition Density
- Effects of processing parameters and heat treatment on the microstructure and magnetic properties of the in-situ synthesized Fe-Ni permalloy produced using direct energy deposition
- Effect of substrate yield strength and grain size on the residual stress of direct energy deposition additive manufacturing measured by neutron diffraction
- Effects of Process Parameters on the Dimensions and Mechanical Properties of L-DED AISI 316L Stainless Steel
- Correlation between Cellular Structure Morphology and Anisotropic Yield in Additively Manufactured Stainless Steel 316L
- Virtual surface morphology generation of Ti-6Al-4V directed energy deposition via conditional generative adversarial network
- Effect of Process Parameter and Scanning Strategy on the Microstructure and Mechanical Properties of Inconel 625 Superalloy Manufactured by Laser Direct Energy Deposition
- Optimalizace procesu kovového 3D tisku metodou DED pro nový obtížně tisknutelný prášek
- A Parametric Study of Laser-Directed Energy Deposited DSS 2205: Microstructure and Mechanical Properties Perspectives